Review: Carbon Fiber stand for baritone saxophone

There are never as many options for a baritone saxophonist as there are for the other saxophones. This is true for brands of horn, mouthpieces, cases, and perhaps especially instrument stands. From a business perspective it makes sense – baritone products are larger, harder to make, need to be able to handle more weight/force and of course are harder to sell since there are less baritonists out there overall. But today I would like to review a product that now goes with me to every rehearsal and gig.

Gijs van Leeuwen is from the Netherlands and has created a company called Woodwind Design. As far as I can tell he has been around for a while, mostly making specialty stands for woodwinds, especially clarinets out of interesting materials, often beautiful woods and other materials. In the last few years however he has developed new carbon fiber stands that he crafts in his workshop (garage?). We mentioned the stands a couple years back. Carbon fiber is quickly becoming a very popular material, not only for its sleek futuristic look but also because it is incredibly strong yet lighter than many metals of the same weight. Its being incorporated more and more into many instrument cases – although beware, some case manufacturers offer a carbon fiber “finish” that looks like but is not actual carbon fiber. Gijs is a woodwind player himself, but also a tinkerer and inventor. His stands in my opinion are the best option for baritone saxophone available.

Low Bb tube with Conn 12M

For many years I traveled around New York City and the east coast playing gigs and rehearsals without a saxophone stand. I have had plenty before, big solid steel ones, and even the lighter K+M plastic ones, but without a car it just wasn’t feasible to carry them to gigs, especially if I had a bag, music stand, and bass clarinet! So the horn inevitably got put onto the floor between sets and sometimes quickly put down all too harshly if there was a quick instrument switch mid song. The horn of course got battered and dinged, which as a baritone player you almost get to the point where you can live with it. With Woodwind Design’s new carbon fiber stands I carry a baritone stand in my case every day – while barely adding any extra weight – quite the life changer.

I have been using the stand nearly every day for 2 years – each stand has a unique serial number and my first stand was #4! The stand has held up beautifully and is in almost like new condition. After putting together a bulk order for a number of NYC saxophonists I received a newer updated stand, and I am very pleased that Gijs continues to improve and upgrade the design, the newer design is even more ingenious (and lighter!) than the first. Check out the photo gallery below, or the video from Gijs as well.

Great features of the Woodwind Design stand:

  • Carbon Fiber tubes sized precisely so they fit nested perfectly into one another to save space
  • The tubes will easily fit into the bell or in a side pocket of a case, the bell holder can be stored on the bell in the case – no extra bag for the stand needed
  • The whole stand weighs only 1.1 pounds!
  • Carbon fiber is strong and will not break easily, also seems to hold up well over time
  • 4 leg design compared to most stands 3 leg design is much more stable, less likely to tip over
  • Screw on Bell holder allows for left to right adjustment if the bell on your saxophone brand is off center
  • Available for both Low Bb horns and Low A horns! You can even purchase an extra tube that allows one stand to function for either.
  • Rubber feet inset to the end of each foot tube keep the stand from sliding
  • Locking system makes sure that the upper tube that holds the bell does not move, as well as the bell holder
  • Alignment markings on each tube to make sure the feet and properly lined up
  • Rubberized bell holder is slightly bendable, adapts to each bell for secure hold and will not damage the horn
  • Each hole and tube are different sizes, so it is obvious to assemble

Woodwind Design Carbon Fiber stand

There are very few downsides to these stands. The main one is cost. They simply aren’t cheap! But carbon fiber as a raw material to work with is very expensive and each stand is had made and fit in the Netherlands. The next downside is how long it takes to get one – the wait can be up to several months from the time you order the stand – and so far they aren’t really distributed and sold in any stores that I know of. The last downside is that because these are hand finished stands, if you happen to lose a single tube, in order to replace it you have to send parts back to the Netherlands for a new tube to be fit precisely to the existing stand – but it can be done.

The stands are also available for all of the other saxophones, and possibly of more interest to baritonists, for bass clarinet as well! Those stands are also the most portable option for bass clarinet. JazzBariSax.com has a small stock of saxophone and bass clarinet stands available for sale. Please contact us if you are interested!

UPDATE – July 2020 we’ve got more in stock!

You can also order the stands directly from the Woodwind design website:
http://www.woodwinddesign.nl/index.php/en/products/saxophone-stands/baritonsaxofoon-standaard-2-detail

Leave a Reply